Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Encino, CA
Gate installation in Encino almost always means working around a hillside, a long driveway, or a specific HOA requirement. The housing stock here runs from post-war ranch homes to large Mediterranean and contemporary builds, and the steep grades south of Ventura Boulevard put every swing and sliding gate under constant load. We’re Gate Repair Atwater Village, and our team has spent 14 years focused exclusively on gate systems, from repair to electric gate repair to full installation. Call (877) 752-2593 for a free site visit and a written quote before any work begins.
Why Encino Homes Are Different
Encino’s gate work splits into two worlds. North of Ventura Boulevard, the flat valley floor holds original post-war ranches with gate operators from the 1980s and 1990s that are finally giving out. South of the Boulevard, the hillside streets climb steeply, and the driveway gates there work harder every day than a flat-lot gate works in a week. A slide gate on a 15% grade pulls against its chain and motor on every cycle. Swing arms flex under the weight of oversized wrought-iron panels. Heat is the other constant. Encino summers regularly pass 100°F, and control boards sitting inside metal operator boxes bake in that heat year after year. Add the dry Santa Ana winds that push dust and debris into tracks and photo-eyes each winter, and you have a market where regular maintenance and competent troubleshooting matter more than a low bid.
There’s also a newer compliance layer in Encino. The city now requires automatic gates to carry photo-eye sensors plus a secondary entrapment device, a rule that went into place more recently than neighboring cities. That means a good share of our calls involve bringing older operators up to code, not just swapping a hinge or a chain.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Encino Services
The two calls we get most from Encino homeowners are mechanical gate repair and electric gate repair, and each has its own page on this site with full cost detail and local conditions. Here’s the short version.
Gate Repair in Encino
Mechanical repair covers the heavy parts: hinges, wheels, chains, track alignment, and the physical damage that comes from hillside strain or a vehicle clip. On Encino’s steep driveways, we see more gate-arm fatigue and chain stretch than on flat streets, so a repair here often includes realigning the whole run, not just replacing one part. Our technicians diagnose the actual failure before recommending any work, which keeps you from paying for parts that weren’t the problem. See the full breakdown on our Gate Repair in Encino page. Estimates are free, and the price is set before we start.
Electric Gate Repair in Encino
Electric gate repair is where Encino’s heat and the newer sensor rules intersect. Control boards overheat, transformers fail, photo-eyes fall out of alignment, and older operators often need a secondary entrapment device added just to meet the city requirement. We work on whatever brand is already installed rather than pushing a replacement, and we stock common parts for the major brands so the first trip is usually the only trip. Read the full detail on our Electric Gate Repair in Encino page, including what a control-board diagnosis looks like and what it costs.
Gate Installation in Encino
New gate installation in Encino replaces operators that have been baking in Valley heat since the 1980s or upgrades homes where a remodel left an old gate guarding a new house. Many of the tall-wall Mediterranean and contemporary builds south of Ventura Boulevard sit on steep lots, and a new gate there needs proper post footings, enough operator torque for the grade, and safety sensors positioned for the real terrain, not a showroom picture. Whether you’re adding a gate for the first time or replacing a tired swing with a new slide, we measure, quote a fixed written price, and handle everything from the post holes to the final sensor alignment. This is the full scope of our Gate Installation service.
Automatic Gate Installation
Signs you need it
You’re manually opening a gate that should open itself, or you have a new build with power and data already stubbed to the gate location but no operator installed.
What it costs in Encino
Figure $4,000 to $10,000 installed for a complete automatic gate with operator, safety sensors, and controls; a basic single swing operator alone runs $1,500 to $3,000.
How we do it
We assess the gate weight, grade, and swing or slide geometry, then set posts for the operator, pull power to the location, install the sensors and secondary entrapment device Encino requires, and program the remotes and keypad with you on site.
Driveway Gate Installation
Signs you need it
Your existing driveway gate sags on steep hinges, no longer closes fully, or the old operator was removed and the gate now stands as a heavy, unsafe manual panel.
What it costs in Encino
Replacing an old driveway gate with a new panel and operator typically runs $5,000 to $12,000 in Encino, depending on steel thickness, finish, and the operator duty rating.
How we do it
We match the new gate to the driveway width and grade, pour new footings where needed, set the gate and operator, then program safety loops or photo-eyes and balance the travel speed for the hill.
What Gate Installation Costs in Encino
| Item | Typical range in Encino |
|---|---|
| Basic single swing gate and operator | $3,000 – $7,500 |
| Automatic gate with operator and code-compliant sensors | $4,000 – $10,000 |
| Full driveway gate replacement on a hillside lot | $5,000 – $12,000 |
Steep hillside properties, custom ironwork, and longer power runs from the house to the gate all push a quote toward the upper end. We set the price in writing before any material is ordered or any hole is dug.
Do you handle the power run for a new automatic gate in Encino?
Yes. We pull power from the nearest panel to the gate location, including trenching where needed, and we size the wire for the operator’s amp draw and the length of run. The written estimate covers the full scope, so there is no separate electrician surprise.
What does a code-compliant automatic gate include in Encino?
It includes photo-eye sensors, a secondary entrapment device, and operator settings matched to the gate’s weight and travel speed. Encino’s current rule requires both the photo-eyes and the secondary device, so we include them on every automatic install without an upcharge line item.
Brands We Service in Encino
We work on Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others, and we keep common boards, sensors, and remotes stocked for faster turnaround. Whether your Encino gate runs a budget residential operator or a commercial-grade DoorKing, our technicians diagnose the actual failure instead of defaulting to a brand swap. See our brands for the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Encino, CA
| Service | Typical range in Encino |
|---|---|
| Gate hinge or wheel replacement | $180 – $420 |
| Track realignment on a slide gate | $250 – $600 |
| Chain or pulley replacement | $200 – $500 |
| Control board replacement | $350 – $900 |
| Photo-eye sensor alignment or replacement | $150 – $400 |
| Adding a secondary entrapment device | $250 – $600 |
| Operator motor replacement | $500 – $1,500 |
| Basic swing gate and operator installation | $3,000 – $7,500 |
| Automatic gate installation with code-compliant sensors | $4,000 – $10,000 |
| Driveway gate replacement on a hillside lot | $5,000 – $12,000 |
In Encino, the big price drivers are grade and operator age. A hillside slide gate with a worn chain and a cooked control board always costs more than a flat-lot swing gate with a bent hinge, because the labor includes full rail realignment and the parts list is longer. Whatever the job, we quote the full price in writing before work starts and we don’t change it unless you ask us to add something.
Neighborhoods We Serve in Encino
We cover the whole Encino area from Ventura Boulevard up into the hills and back down to the flat lots on the valley floor. Response times are fastest for calls along the main corridors, and we route hillside jobs with extra time because the driveway work itself takes longer on grade.
- Encino Hills
- Rancho Estates
- Encino Park
- Amestoy Estates
- Lake Encino
Service Area – Cities Near Encino
From our shop, we also cover neighboring communities with the same gate specialists and stocked parts. That includes Los Feliz, CA, East Hollywood, CA, Melrose, CA, and Atwater Village, CA. If you’re just outside one of those areas, call and we’ll tell you straight whether we can route a technician to you.
Serving Encino, CA – Our Local Coverage Area
We serve Encino and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Encino
Call (877) 752-2593. We answer 24/7. For repair calls, fast dispatch runs from 7am to 7pm, Sunday through Friday. We’re closed Saturday. A call outside dispatch hours is booked into the next opening.
Most automatic gate work in Encino is a repair or like-for-like replacement, which doesn’t pull a permit. If your job adds new electrical service or changes the gate’s footprint, ask the city building department. We’ll tell you what we see and let you make the call with them.
Yes. We install what your HOA or design committee has approved, including specific ironwork, finish colors, and operator noise limits. Bring us the written requirement and we’ll quote to it, not around it.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Encino Customers Say
"Gate stopped halfway and sat there for two days blocking the driveway. He found a dead capacitor in the operator, had one with him, and we were moving cars again in under an hour."
- Katie Sutton"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Jodi Miller"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Miguel Ramirez