Wood & steel frame
Wrought iron
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in East Hollywood, CA
Gate installation in East Hollywood usually means working with a narrow 1920s driveway, a sidewalk gate right at the property line, and a homeowner who treats that gate as their first line of defense against street traffic. We’re Gate Repair Atwater Village, a dedicated gate specialist, not a general contractor who occasionally hangs a gate. We answer 24/7 and run estimates and installs from 7am to 7pm, Sunday through Friday. Call (877) 752-2593 for a free written estimate on a new gate or a repair on the one you have.
Why East Hollywood Homes Are Different
East Hollywood’s housing stock was mostly built between the 1920s and 1940s: one- and two-story bungalows, Spanish Colonial fourplexes, and 1960s courtyard apartments. The driveways are short and end at the sidewalk, which changes the kind of gate work we do here. Most jobs are short-run sliding gates or swing gates squeezed against a stucco wall or a neighbor’s fence. The original hardware is often welded steel or a wood frame riding on old track set into a cracked concrete apron. When the concrete shifts or the track fills with grit, the gate starts dragging and eventually stops closing.
The climate does its part too. East Hollywood summers are hot and dry, which makes powder-coated steel and wood gates expand and bind. When winter rain arrives, it washes dried leaves and street dust into the track channels. A gate that worked fine in March often sticks by August because the metal grew and nobody lubricated the rollers. Our technicians see this pattern constantly on Fountain, Normandie, Virgil, and around Barnsdall Park. The fix is rarely a new gate; it’s usually track alignment, roller replacement, and a lubrication schedule that actually holds up to the heat.
There’s also a security angle here that changes how people think about gates. Parking is tight and sidewalk foot traffic is constant. For a lot of East Hollywood residents, the driveway gate is a de facto barrier, not a curb-appeal feature. We regularly find gates that homeowners have modified with padlocks, chains, and slide bolts that were never part of the original hardware. Those additions wear out the operator and bend the track over time. We work with what’s there, replace what’s damaged, and keep the gate as a real security barrier instead of a decoration.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main East Hollywood Services
Most calls from East Hollywood fall into two buckets: a gate that won’t open or close at all, and an automatic gate that moves but doesn’t work right. Both deserve a specialist who knows the hardware and the operator brands in this market.
Gate Repair in East Hollywood
East Hollywood’s pre-war gates are usually steel or wood on old track, and the most common failures are bent rollers, rusted hinges, sagging frames, and track that’s pulled loose from the concrete. On a narrow lot, even a small misalignment means the gate catches on the apron or scrapes the sidewalk. Gate Repair in East Hollywood covers all of it, from replacing worn wheels to straightening a welded steel frame in place. We answer 24/7 and dispatch Sunday through Friday.
Electric Gate Repair in East Hollywood
Automatic gates fail differently. The operator may run but not move the gate, the safety loops may trip constantly, or the remote stops working after a power blink. East Hollywood’s heat pushes boards and wiring hard, and the tight spaces mean a misadjusted opener can swing the gate into a car or a pedestrian. Electric Gate Repair in East Hollywood handles operator diagnostics, safety-edge replacement, limit-switch adjustment, and control board repair. If the gate is automatic, the wiring is energized, and we’d rather a trained technician open that panel than have a homeowner guess.
Gate Installation in East Hollywood
Gate installation on an East Hollywood lot means building around what’s already there: a concrete apron that may have settled, a property line that’s six feet from the building, and a driveway that has to keep working while we install. We measure the opening, check the track or hinge points, match the gate to the existing posts or set new ones at proper footing depth, and wire the operator if the job includes automation. Most important, we quote the full job before any work starts. That written estimate is the price you’ll see at the end.
We work from Gate Installation to full automation, so you don’t need a fence company for the frame and a separate electrician for the opener. One crew handles the gate, the track, and the power run.
Automatic Gate Installation
Signs you need it
You want to stop getting out of the car to open the gate, or your current manual gate has become the only thing between your car and the sidewalk.
What it costs in East Hollywood
Automatic gate installation in East Hollywood typically runs from $1,800 to $7,000 depending on gate size, operator brand, and whether the concrete needs cutting for a track or the power needs a new run.
How we do it
We measure the opening, mount the operator to the gate and column, set the safety edges, wire the control board, and run the motor through several open-close cycles while you watch.
Driveway Gate Installation
Signs you need it
Your existing gate is rusted through, the posts are leaning, or you never had a gate and want a real barrier at the sidewalk.
What it costs in East Hollywood
Driveway gate installation in East Hollywood typically runs from $900 to $6,500, with slide gates on the lower-mid end and custom steel swing gates at the top.
How we do it
We pull the old gate and track, set posts at proper depth, hang the new gate, align it to the ground and the latch, and then put the opener in if the job calls for one.
Sliding Gate Installation
Signs you need it
Your driveway is too short for a swing gate, or you want the gate to tuck back along the fence instead of swinging out over the sidewalk.
What it costs in East Hollywood
Sliding gate installation in East Hollywood typically runs from $1,800 to $7,000 depending on whether the gate is cantilever, V-track, or rolling-wheel style and how much concrete work the track needs.
How we do it
We lay out the track line, pour or repair the concrete pad, set the rollers or the cantilever posts, hang the gate, and test the travel at least a dozen times to make sure it doesn’t bind in the heat.
Electric Gate Installation
Signs you need it
You have a gate but you want it motorized, or you’re putting in a new gate and want the opener installed in the same visit rather than adding it later.
What it costs in East Hollywood
Electric gate installation in East Hollywood typically runs from $2,400 to $8,000 including the gate, the operator, the safety edges, and the power run to the panel.
How we do it
We mount the operator, pull the low-voltage wire, set the safety loops or edges, pair the remotes, and run the gate until the limits and force settings are dialed in.
What Gate Installation Costs in East Hollywood
| Item | Typical range in East Hollywood |
|---|---|
| Basic manual swing gate, steel or wood | $900 – $2,500 |
| Automatic gate with operator and safety edges | $1,800 – $7,000 |
| Sliding gate with track, rollers, and motor | $1,800 – $7,000 |
East Hollywood adds a few cost drivers. Short driveways mean the gate has to sit close to the sidewalk, which sometimes means reworking the concrete apron or relocating the gate line. And the heat warps steel, so we set slide-gate tracks with expansion in mind rather than cutting them tight. Every estimate is free and the price is set before we start. Call (877) 752-2593 and we’ll come measure it.
How long does a new gate take to install in East Hollywood?
Most basic manual gates go in the same day. Automatic gates take a day to install and a second visit to fine-tune the operator, program remotes, and test the safety edges. Custom steel gates add a fabrication lead time.
Do I need a permit to install a gate in East Hollywood?
Most cities in Los Angeles County ask for a permit when a new gate includes electrical work or a post set into the public right-of-way. We’ll tell you what to ask your city’s building department before we start, and we handle the work itself.
Brands We Service in East Hollywood
We’re fluent in nine gate and operator brands, so whatever is already on your East Hollywood driveway, we work on it. We keep common parts for Ghost Controls, DoorKing, Elite, and Mighty Mule in the truck, which means less waiting on a distributor and more same-day fixes. Our brands page has the full list.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in East Hollywood, CA
| Service | Typical range in East Hollywood |
|---|---|
| Gate repair, on-site (labor only) | $75 – $150 per hour |
| Electric gate repair (operator diagnostics, boards, limits) | $200 – $600 per visit |
| Basic manual gate installation | $900 – $5,000 |
| Automatic gate installation, including operator | $1,800 – $7,000 |
| Sliding gate installation | $1,800 – $7,000 |
| Driveway gate installation | $900 – $6,500 |
| Electric gate installation | $2,400 – $8,000 |
| Operator replacement or new motor | $700 – $1,600 |
| Safety edge or safety loop repair | $250 – $500 |
What pushes the price up in East Hollywood is the narrow lot. When the gate is close to the sidewalk, the track work, concrete, and alignment all take more care than a suburban driveway gate with room to spare. Heat expansion and cracked aprons also mean we sometimes re-pour a small section before the track goes in. The written estimate sets the price. If the scope changes on-site, you’ll know before we do anything else.
Neighborhoods We Serve in East Hollywood
We cover all of East Hollywood proper and the neighborhoods right around it. Most calls we can reach the same day from the Atwater Village shop, Sunday through Friday. If you’re near one of the stretches below, just call and we’ll get a technician out.
- Little Armenia
- Thai Town
- Virgil Village
- Los Feliz border
- Silver Lake edge
Service Area – Cities Near East Hollywood
We also run calls to the neighborhoods and cities that touch East Hollywood. If you’re up in Los Feliz, CA or over toward Melrose, CA, the drive is short. Westlake, CA and Atwater Village, CA are both in our regular rotation too. Call (877) 752-2593 and we’ll tell you when we can be there.
Serving East Hollywood, CA – Our Local Coverage Area
We serve East Hollywood and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in East Hollywood
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday, and most East Hollywood calls get a technician the same day if you call before midday. We’re closed Saturday, but Sunday is on the schedule.
East Hollywood has a lot of Spanish Colonial and pre-war character, and a new steel gate can either match it or stand out. We talk through the style of the building and the street before we fabricate or order anything, so the gate looks like it belongs.
We work on LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule, so if the gate in East Hollywood runs on one of those, we’ll diagnose it. For anything else, we’ll tell you straight what the parts situation looks like before you spend money.
Call (877) 752-2593 for a free estimate on gate repair or a new gate in East Hollywood. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What East Hollywood Customers Say
"Reprogrammed every clicker in the HOA and set up the keypad codes. Patient with a very long list of residents."
- Raj Rao"Control board fried after a lightning storm. He showed me the burn mark on it, quoted the board, and installed a surge protector on the line so it hopefully doesn't happen again."
- Luis Guzman"Hinge post had rotted at the base and the whole swing gate was sagging into the concrete. He rebuilt the post rather than talking us into a whole new gate, which two other companies had pushed for."
- Diego Flores