Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateGate Company in Melrose, CA
Gate installation in Melrose starts with the house itself. Most homes here went up between 1910 and 1930, which means driveways were cut for narrower cars, side yards were tight, and original openings were rarely square or standard. A new gate on a Melrose property is almost always a custom-fit job, built around stucco walls, Spanish tile, and lot lines that wander. We start every installation with a free on-site measure and a written estimate, so the price is set before any work begins. Call (877) 752-2593. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Why Melrose Homes Are Different
Melrose’s gate work is shaped by a dense stretch of early-20th-century Spanish Colonial and Craftsman bungalows and duplexes whose original driveways, side-yard setbacks, and Spanish-tile or stucco fence lines make every gate a tight, custom-fit job rather than a stock-panel replacement. The street-facing iron gates here double as design statements on a walkable retail corridor, so repairs are judged on curb appeal as much as function. Off Melrose Avenue, you’ll find original wrought-iron pedestrian gates set into stucco garden walls at odd angles following the lot line. A hinge replacement that looks simple often turns into re-plumbing a post that was set in 1920s concrete.
The climate does its part too. Southern California’s dry, sunny weather is kind to painted finishes, but relentless UV degrades wood gates and their stains over the years. Winter rain softens the ground just enough to let posts shift, and the dry season shrinks it back, so hinges sag and gates drag. Most Melrose properties also sit on small lots with narrow side yards, which means gate operators need compact mounting and careful travel limits. We work with all of it.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Our Main Melrose Services
Melrose homeowners call us most often for two things: a gate that won’t move right, and a gate that won’t open at all because the electric side failed. Both are jobs we handle on the same visit, with the brand knowledge already in the truck.
Gate Repair in Melrose
A sagging driveway gate on a 1920s Melrose duplex usually traces back to a post that has shifted in old concrete, not just a worn hinge. We repair the post, re-hang the gate, and adjust the latch so it closes clean against the stucco. Wood gates get checked for UV damage and rot at the bottom rail. Wrought-iron gates get straightened, re-welded where needed, and touched up so the repair doesn’t stand out from the curb. For the full scope of what we fix, see Gate Repair in Melrose.
Electric Gate Repair in Melrose
Automatic gates on Melrose’s small lots often fail at the operator: a control board that stopped responding, a safety loop that won’t sense, or a remote that lost its programming. We diagnose the actual fault before replacing anything, across Ghost Controls, DoorKing, Elite, and Mighty Mule systems, among others. Tight side yards make travel limits critical here, so we re-test the full open and close cycle after every repair. Details on how we handle wiring, sensors, and operators are on Electric Gate Repair in Melrose.
Gate Installation in Melrose
A new gate on a Melrose property has to fit an opening that was framed before most modern gate manufacturers existed. Many of these 1910s and 1930s bungalows and duplexes have stucco walls, irregular setbacks, and original posts that were never square to begin with. That’s why stock panels rarely work here, and why we measure, fabricate, and install every gate to the actual opening, not the closest catalog size. From the first measure to the final paint touch-up, this is Gate Installation done for the house as it stands. The dry, sunny climate means we recommend finishes that hold up to strong UV exposure, especially on wood gates facing west or south.
Automatic Gate Installation
Signs you need it
You’re still getting out of the car to open a driveway gate by hand, or you’re adding a gate where there wasn’t one and want it automated from day one.
What it costs in Melrose
Typical automatic gate installation in Melrose runs $2,800 to $5,500 depending on the gate size, operator brand, and whether new posts and conduit are needed.
How we do it
We set or reinforce the posts, hang the gate, mount the operator, run conduit and wiring to a dedicated circuit, program remotes and keypads, and test the full cycle with safety loops in place.
Driveway Gate Installation
Signs you need it
The old gate no longer matches the house, the frame has pulled away from a stucco wall, or there’s no gate and the driveway opens straight to the street.
What it costs in Melrose
A new driveway gate in Melrose typically costs $2,200 to $5,600 installed, with custom iron work and motorization at the upper end.
How we do it
We measure the exact opening, build or order the gate to fit, set posts to proper footing depth, hang the gate, and adjust the hinges and latch for a clean close.
What Gate Installation Costs in Melrose
| Item | Typical range in Melrose |
|---|---|
| Driveway gate, installed | $2,200 – $5,600 |
| Automatic gate with operator | $2,800 – $5,500 |
| Custom iron or wood gate, fabricated to fit | $1,800 – $6,000 |
Do I need a permit to install a gate in Melrose?
A new gate with an operator usually needs a permit, and the requirements vary by street and lot. We’ll tell you what we’ve seen on similar Melrose properties, but the final word comes from the city building department, so we check before we start.
How long does a gate installation take in Melrose?
Most Melrose installations take one to two days, depending on whether we’re setting new posts, running conduit, or working around an old concrete footing. We’ll give you a written schedule with the estimate, and the price is set before any work begins.
Brands We Service in Melrose
We work on whatever system is already installed on your Melrose property, with certified working knowledge of nine major gate and operator brands. Ghost Controls, DoorKing, Elite, and Mighty Mule are common on Melrose driveways, and we keep the parts for those systems stocked locally for faster turnaround. See our brands for the full list. Our technicians troubleshoot the actual fault rather than defaulting to a brand upsell, because the goal is a gate that works, not a sales pitch.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Company in Melrose, CA
| Service | Typical range in Melrose |
|---|---|
| Gate repair, minor adjustment or latch | $150 – $350 |
| Gate repair, post reset or re-hang | $350 – $900 |
| Electric gate repair, control board or sensor | $250 – $700 |
| Electric gate repair, operator replacement | $700 – $1,700 |
| Driveway gate installation | $2,200 – $5,600 |
| Automatic gate installation | $2,800 – $5,500 |
| Sliding gate installation | $2,500 – $6,500 |
| Custom iron or wood gate | $1,800 – $6,000 |
Prices in Melrose push toward the upper end when a 1920s post has to be re-plumbed, when conduit has to run under a narrow side yard, or when the gate itself is a custom iron design that has to match the original. Neighboring Melrose properties can look the same from the street and still quote differently once we see the footing. Whatever the range, the price is quoted and agreed in writing before any work starts, so the invoice never comes as a surprise.
Neighborhoods We Serve in Melrose
We work throughout Melrose and the blocks off Melrose Avenue, where original gates and stucco walls dominate the streetscape. Response time for most of the area is fast, since our trucks dispatch from 7am to 7pm, Sunday through Friday.
- Melrose Avenue corridor
- North Melrose
- Melrose Hill
- South of Melrose, toward the 101
- The duplex blocks west of Western
Service Area – Cities Near Melrose
If your property sits just outside Melrose, we likely cover it too. We regularly work with homeowners in East Hollywood, CA, Los Feliz, CA, Westlake, CA, and Atwater Village, CA. Each of these areas has the same older housing stock and tight gate openings, so the work carries over naturally.
Serving Melrose, CA – Our Local Coverage Area
We serve Melrose and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Company in Melrose
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. For most Melrose addresses, a technician can be on site the same day you call. A call outside dispatch hours is booked into the next opening, Sunday through Friday, 7am to 7pm.
Many Melrose streets are covered by preservation or neighborhood design guidelines, and some duplexes and courtyard apartments have specific rules about gate height, finish, and automation. We’ll build to what your HOA or property manager requires, and help you document the specs before installation.
Yes. We’re gate specialists, not generalists, and electric gate repair is a core part of what we do. A single team handles the post, the gate, the operator, the wiring, and the final safety test, so there’s no separate electrician to schedule and no finger-pointing if something goes wrong later.
Call (877) 752-2593 for a free estimate on any gate repair, electric gate repair, or gate installation in Melrose. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
What happens when you call
- 1A real person answersNo phone trees. Talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3A background-checked tech heads outLicensed & insured, typically within 60 minutes.
- 4You approve before work beginsNothing starts until you say go.
What Melrose Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Jodi Miller"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Miguel Ramirez"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Vivian Nguyen