Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateFast, Reliable Gate Repair Across Los Feliz
If your gate in Los Feliz is sagging, stuck, or completely dead, the fix usually comes down to two things: an honest diagnosis and a technician who understands old gates on hillside lots. We work on the original wrought-iron gates hanging between 1920s brick piers all over this neighborhood, and we know how they fail. Call (877) 752-2593 and we’ll walk you through what’s likely wrong before we ever send a truck. Most Los Feliz repair jobs are quoted same-day, and every price is agreed in writing before any work begins.
Why Los Feliz Homeowners Call Gate Repair Atwater Village for Gate Repair
Los Feliz isn’t a neighborhood where a generic fence company shows up and guesses. The gates here were often built by hand in the 1920s and 1930s, hung on massive brick or stone piers that predate automatic openers by four decades. When a modern operator goes on one of those piers, the pier itself is usually the first thing that needs attention. We’ve been doing this work since 2012, and that’s most of what we see off Los Feliz Boulevard and up the streets climbing toward Griffith Park.
Our gate repair techs carry parts for the brands already installed on older Los Feliz homes: LiftMaster and FAAC boards, BFT rack and pinion components, Linear and Viking operators. We’re not pushing a single brand. We diagnose the gate you actually have, and we tell you plainly if a repair makes sense or if you’re throwing money at a gate that’s reached the end of its life.
We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday. You’ll get a written estimate before any work starts, and the technician who shows up is a gate specialist, not a handyman fitting you in between other trades.
Styles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
Gate Welding in Los Feliz
Gate welding in Los Feliz is almost always about preserving the original look of a 1920s or 1930s wrought-iron gate. The welds that held these gates together for a century finally crack at the hinge stiles, or a panel splits where the scrollwork meets the frame. Our welders repair the gate in place when we can, or remove the leaf and weld it in a shop setting when the damage wraps around a joint. Typical Los Feliz gate welding runs $250 to $600 per leaf depending on how much cracked steel we find. More extensive work, like rebuilding a twisted frame or replacing rotted lower rails, can push to $1,200 or more when we have to fabricate matching sections.
Hand-Forged Ironwork Repair
A hand-forged Los Feliz gate isn’t something you swap for a box-store aluminum panel. The value is in the material and the fact that nobody makes that exact pattern anymore. We weld cracks, straighten bent scrollwork, and rebuild sections using steel that matches the existing thickness and profile. The goal is a gate that looks original but holds square for another generation.
Weld & Rust Repair
Los Feliz’s dry climate slows rust, but forty or fifty years of sprinkler overspray and occasional rain still eats through lower rails and hinge plates. We cut out the rusted section, weld in new steel, and treat the surrounding metal so the repair doesn’t fail two years from now. When the rust is mostly surface-level, we grind, prime, and repaint. When it’s structural, we replace the section rather than patching it.
Commercial Gate Repair in Los Feliz
Commercial gate repair in Los Feliz means apartment building and small retail gates that cycle dozens or hundreds of times a day. These are slide gates and swing gates equipped with operators from DoorKing, BFT, FAAC, and Linear. The failure mode is usually the same everywhere: a gate that gets used constantly wears out hinges, rollers, chain, and control boards faster than any residential gate ever will. We handle light commercial work across Los Feliz, from a broken exit loop on a Vermont Avenue lot to a slide gate that’s jammed off its track behind a mixed-use building.
Heavy-Cycle Swing Gates
When an apartment gate cycles 80 times a day, hinge pins wear oval and the gate starts dragging. We replace hinge assemblies with heavy-duty sealed bearing hinges, reinforce the post mounting, and realign the operator so it isn’t fighting the gate on every cycle. Fixing this early costs a few hundred dollars. Ignoring it until the operator burns out costs over a thousand.
Slide Gate Track & Roller Repair
Slide gates on commercial Los Feliz properties collect debris in the track, which bends the track and chews up rollers. We clear the track, replace damaged sections, install new roller assemblies, and set the operator limits so the gate stops where it’s supposed to. Typical track and roller repair in Los Feliz runs $400 to $900 depending on gate length and how many rollers need replacing.
Trusted Brands We Service in Los Feliz
We work on nine major gate and operator brands, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Los Feliz because the neighborhood’s gates are rarely less than twenty years old, and the brand on the motor is usually whatever the previous owner installed. We troubleshoot the actual system in front of us rather than recommending a brand swap so we can sell you something. That brand-agnostic approach is why property managers call us when their usual vendor won’t touch a gate that isn’t theirs.
Common Gate Repair Problems We See in Los Feliz Homes
- Obsolete control boards. Many Los Feliz gates run on operators from the 1990s and early 2000s. When a LiftMaster or FAAC board from that era dies, it can’t be reprogrammed. A board swap or full operator replacement is the only honest fix.
- Sagging gates on old masonry piers. The 1920s brick and stone piers that frame Los Feliz driveways were built for a simple swinging gate, not a 300-pound automated leaf. Rusted hinges and shifted piers pull the gate down until it drags.
- Santa Ana wind damage. When Santa Ana winds come through the Los Angeles River corridor, unsupported swing gates rack and twist. Gate posts that were just fine in spring can shift enough in one windstorm that the gate won’t latch.
- Post-shift after minor tremors. Southern California seismic activity is a fact of life in Los Feliz. After even a small tremor, gate posts on steep lots can move enough to throw the gate out of alignment, and hinge bolts lose their bite.
See the difference
Before
After
Before
After
Before
AfterPricing for Gate Repair in Los Feliz, CA
A service visit and straightforward gate realignment in Los Feliz typically runs $150 to $350. Hinge replacement on a wrought-iron driveway gate usually lands between $250 and $500 per gate depending on hinge size and whether the post needs reinforcing. Gate welding for cracked ironwork runs $250 to $600 per leaf, and a full operator replacement, including labor, runs $850 to $1,800 depending on the brand and whether we’re replacing a dead board or the entire motor and arm. The written estimate sets your price. You’ll know the number before we touch a single bolt.
We Also Serve Cities Near Los Feliz
Our technicians are based nearby and cover Los Feliz along with surrounding areas like East Hollywood, Melrose, Atwater Village, and Westlake. Most calls from Los Feliz get a technician out the same day and you won’t pay the kind of travel markup a far-off company adds on.
Serving Los Feliz, CA – Our Local Coverage Area
We serve Los Feliz and nearby communities. Use the map below to see the area we cover. If you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Los Feliz
You can usually add an opener to an existing gate, but in Los Feliz the pier is often the real obstacle. Most 1920s brick and stone piers were never built to hold a motorized gate, so we reinforce the masonry and reset the hinge post footings before mounting anything. A new gate isn’t automatically required, but if the gate itself is twisting or the iron is failing in multiple places, replacement starts to look cheaper than chasing repairs. Call (877) 752-2593 and we’ll tell you which way leans.
Boards from the 1990s and early 2000s, which cover most older LiftMaster and FAAC operators in Los Feliz, are now obsolete. There’s no reprogramming them. A new board, when one is still available, runs $300 to $600 installed. A full replacement operator runs $850 to $1,800. We’ll give you both numbers honestly and let you decide. Estimates are free.
If the gate sags toward the latch and the hinge post visibly leans, it’s a post problem. In Los Feliz, this usually traces back to eroded or undersized footings under 1920s piers. Re-hanging the panel on loose posts buys you months, not years. We check the post first because that’s the part holding the weight. Call (877) 752-2593 for a free on-site look.
Yes. Modern automatic gates are required to have entrapment protection, typically in the form of safety photocells and reversing edges. Many older Los Feliz gates have neither, and adding them is part of any operator replacement we do. Ask your city’s building department about the current requirement, and we’ll install whatever the code calls for.
We can. Original hand-forged Los Feliz gates are often worth repairing rather than replacing because the ironwork is thick, handmade, and cannot be matched at a big-box store. We weld cracks, straighten bent sections, and rebuild rusted lower rails so the gate stays structurally sound and looks like it belongs on your house. Typical welding work runs $250 to $600 per leaf.
Call Gate Repair Atwater Village for Gate Repair in Los Feliz
If your Los Feliz gate is sagging, stuck, silent, or just not right, call (877) 752-2593. We answer 24/7 and dispatch technicians Sunday through Friday, 7am to 7pm. You’ll get a specialist who understands 1920s piers, hand-forged hinges, and the quirks of hillside gates. The estimate is free and the price is set before any work starts.
Written by Tim Merrick, Owner at Gate Repair Atwater Village, serving Los Feliz since 2012.