Wrought iron
Wood & steel frame
Farm & ranch
Sliding driveway gates
LiftMaster operatorsFree on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Get your free estimateStyles & brands we work with
- Wrought iron
- Wood & steel frame
- Farm & ranch
- Sliding driveway gates
- LiftMaster operators
See the difference
Before
After
Before
After
Before
AfterHow Much Does Gate Installation Cost in Atwater Village?
Gate installation in Atwater Village typically runs $3,200 to $5,600 for a standard single swing gate with an automatic opener, and $6,500 to $11,000 for a double driveway gate with automation. A basic manual gate with no operator sits lower, around $2,200 to $3,400. The written estimate sets the final price, and the range swings mostly on gate width, material, and how much concrete and electrical work the site needs.
Why We Quote Installation Differently Than a Fence Company
We’re gate specialists, not generalists. A fence contractor who pours posts and hangs panels for a living can build a gate, but the part that fails first is usually the operator, the wiring, or the geometry between the hinges and the arm. That’s the part we do every day.
Our technicians work fluently across nine gate and operator brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. When we quote an installation, we’re pricing the whole system – gate, hardware, operator, safety devices – as one machine that has to cycle thousands of times a year without binding. If you already own an operator or want a specific brand, we work with it. No pressure to switch. If you’re starting from scratch, we’ll tell you which tiers of equipment make sense for a driveway your size and how often you actually open it.
This is also why our first pass at a quote takes a little longer than a phone estimate. We need to see the grade, the existing posts, and where the power is. Diagnosis first, price second. You’ll find the same approach across our gate repair Atwater Village work and every install we do.
Gate Installation Cost Breakdown (2026)
Here’s how the numbers stack up in the Atwater Village market. These are typical estimates, not exact quotes – your gate width, material choice, and site conditions decide where you land in each range.
| Line Item | Typical Range |
|---|---|
| Single swing gate, manual (steel or wood, up to 12 ft) | $2,200 – $3,400 |
| Single swing gate with automatic opener | $3,200 – $5,600 |
| Double driveway gate, manual | $4,000 – $6,500 |
| Double driveway gate with two operators | $6,500 – $11,000 |
| Sliding gate with rack-and-pinion operator | $5,500 – $9,500 |
| Operator and receiver (residential tier) | $600 – $1,400 |
| Operator (commercial-grade, for heavier gates) | $1,400 – $3,200 |
| Safety devices (photobeam, edge sensors, loops) | $250 – $800 |
| Electrical run to the gate location | $400 – $1,800 |
| Concrete footings and post setting | $300 – $900 |
| Keypad, intercom, or telephone entry | $300 – $1,200 |
What drives the price up: heavier gate material (a solid redwood or wrought-iron double gate costs more than a tubular steel frame), a longer electrical trench run, sloping grade that needs custom hinge geometry, and commercial-grade operators for property managers running a lot with regular traffic. What drives it down: a manual gate with no operator, an existing pad and power supply already in place, and keeping the gate width to what the operator can handle without a bigger motor. The estimate is free, and we don’t pad it with parts you don’t need.
What Affects Gate Installation Pricing in Atwater Village
- Gate width and weight. A 16-foot double gate needs two operators or one heavy-duty unit. Wider gates also need sturdier posts and deeper footings. Narrow walk gates are the cheapest option and cycle fine on a light-duty operator.
- Material. Tubular steel is the value pick. Redwood and cedar cost more up front and need more upkeep in our climate. Wrought iron looks right on the older homes around Atwater Village but adds weight that pushes you into a commercial-tier operator.
- Power and trenching. If the gate location is far from the panel, the electrical run adds cost. Solar operators avoid the trench entirely – worth considering for a back gate or a spot where trenching a mature yard doesn’t make sense.
- Grade and soil. Our side of Los Angeles sits on a mix of flat lots and gentle slopes. A gate on a slope needs custom stops and hinge positioning, or it will drag and stress the operator on every cycle.
- Existing structures. If there’s a sound masonry pier or wood post at the hinge point, we can build off it. If the posts are old, rotted, or out of plumb, they come out and fresh footings go in, which adds to the job.
- Entry hardware. A keypad is the simple case. A telephone entry system with a directory, like the DoorKing setups common on multi-unit properties, costs more to wire and configure but earns its keep on a rental.
Manual Gate or Automatic? The Real Cost Difference
Every install we quote in Atwater Village starts with that question, because it changes the job more than any single material choice. A manual double gate runs $4,000 to $6,500 installed. Add two operators, safety sensors, and the electrical run, and you’re at $6,500 to $11,000.
What you get for the extra $2,500 to $4,500 is a gate that opens from the car without getting out, which matters on a lot where the driveway is steep or the gate is wide enough that a manual swing gets old fast. What you also get is moving machinery that has to be installed correctly the first time. A poorly sized operator on a heavy gate burns through its gearbox in a couple of years. That’s why we spec the operator to the gate rather than the other way around – and why we’d rather turn down a job than hang a residential opener on a gate that needs commercial hardware.
If you’re not sure yet, the honest answer is often “manual now, automated later.” We’ll size the posts and footings so an operator can be added without rebuilding. That saves you the tear-out when you’re ready.
What Happens When You Call for an Installation Estimate
You call, we ask a few questions about the gate width, material, and where the power is, and we set a time for a technician to look at the site. The estimate is free and the price is set per job by the written estimate.
During the visit the technician checks the hinge-line grade, whether existing posts can be reused, the distance to the panel, and whether there’s clearance for the gate to swing or slide. You get an itemized number. If something on the list doesn’t need doing, it comes off. That’s the whole process, and it’s the same one our Atwater Village customers get whether they’re automating a front gate or adding a back gate for a rental.
How to Save on Gate Installation
There’s no secret coupon in gate work. The savings come from getting the scope right before anyone picks up a shovel.
- Reuse sound posts when they’re truly sound. We check plumb and rot at the hinge point. If they pass, that line item drops.
- Size the operator to the gate once. Buying the cheapest residential unit for a heavy gate means replacing it sooner. Matching the operator correctly is the real long-term saving.
- Add automation in the same job as the install. Fitting an operator during installation is cheaper than retrofitting later, because the posts and footings are already sized for it.
- Plan the entry hardware early. Running keypad or intercom wiring while the trench is open saves a second visit.
- Handle the permit yourself if you can. Most cities require a permit for a gate this size, so ask your city’s building department what’s required and whether pulling it yourself is an option.
None of that requires a special deal. It’s just scoping honestly. For a no-pressure number, call (877) 752-2593 – the estimate is free, and we’ll tell you what’s actually needed and what isn’t.
Common Installation Mistakes to Avoid
The failures we see come from three things: undersized posts, wrong-grade operators, and safety devices left off.
An undersized post on a double gate sags within a year, which throws off the hinge alignment and drags the operator through every cycle. A residential operator on a heavy wrought-iron gate overheats and wipes out its gearbox. And a gate without photobeams or edge sensors goes down as an unsafe install, because gate operators are powerful enough to crush the frame of a car and they don’t reverse unless the safety device tells them to open. We fit photobeams and a closing-edge sensor as part of every automatic install. If you’re pricing competitors against each other, ask whether safety devices are in their number. That’s where a cheap quote hides its cost.
Gate Installation vs Repair: Which Do You Actually Need?
Not every call is an install. If your current gate is sound at the frame and hinge point but the operator won’t move or the wiring has gone bad, repair is the cheaper answer, and it’s the category we know best. Our gate repair side handles the mechanical work – hinges, rollers, latches, alignment – while the automation side covers operators, receivers, and controls. If your automatic gate is down, our electric gate repair covers diagnostic work on all nine brands we service, including LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule.
The quick rule: if the gate itself is rusted out, twisted, or undersized for what you need, replace it. If the gate is solid but the system acting up isn’t, repair it. We’ll tell you which honestly, because a repair that gets you three more years out of a gate is usually the right answer, and we won’t talk you into a new install just because installation is also on the menu.
Safety: Gate Operators Are Not a DIY Install
A gate operator is a motor driving a few hundred pounds of steel on a fixed path. The dangerous parts are the operator’s wiring and power and the heavy panels that can crush a person or a vehicle. Getting the control wiring wrong is a shock hazard, and a gate that closes without functioning sensor reversal is a serious injury risk.
A trained professional should handle the operator and the electrical side. This is exactly why we fit safety devices as standard and check that the gate stops and reverses before we call the job done. If you’re installing yourself, at minimum have a licensed electrician make the power connection and confirm the sensors work every cycle.
FAQs – Gate Installation Cost
How much does a full automatic gate installation cost in Atwater Village?
A complete single automatic gate install in Atwater Village runs $3,200 to $5,600, and a double driveway gate with two operators runs $6,500 to $11,000. That range includes the gate, hardware, operator, safety devices, and a typical electrical run. Call (877) 752-2593 for a free, itemized estimate.
How much cheaper is a manual gate than an automatic one?
About $2,500 to $4,500 cheaper on a double driveway gate. A manual double install runs $4,000 to $6,500 against $6,500 to $11,000 for the automated version. Plan on automation later? We size the posts so it can be added without a rebuild. Call (877) 752-2593 to talk through which path fits.
Is it cheaper to repair my gate or install a new one?
Repair is usually the cheaper answer when the gate frame and posts are sound – often $300 to $900 for a mechanical fix, versus a full install. A replace makes sense once the gate is rusted through, twisted, or undersized for the opening. We’ll tell you which you actually need. Call (877) 752-2593.
Do I need a permit to install a gate in Atwater Village?
Most cities require a permit for a gate and operator install of this size. Ask your city’s building department what applies to your property before work begins. We can walk you through what the job involves so you know what to ask. Call (877) 752-2593 for a free estimate.
Can you install a gate on my existing posts?
Often, yes – $300 to $900 cheaper than fresh footings, if the posts are plumb and free of rot at the hinge point. We check both before quoting. A slope or a tired old post means new footings. Call (877) 752-2593 and we’ll book a time to look.
What brands of gate operators do you install?
We work fluently across nine: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That covers everything from budget residential to commercial-grade systems. If you already own an operator or want a specific brand, we’ll work with it. Call (877) 752-2593.
Get Your Gate Installation Estimate
We’re gate specialists, not generalists, and we’ve been serving Atwater Village since 2012. Whether you’re automating a manual front gate, replacing a rusted driveway gate, or starting fresh on a new property, we’ll diagnose what’s actually needed and give you a straight number. The estimate is free, and the price is set per job by the written estimate. Call (877) 752-2593. We answer 24/7. Fast dispatch from 7am to 7pm, Sunday through Friday.
Pricing reflects the Atwater Village market as of 2026. Gate Repair Atwater Village offers free estimates – call (877) 752-2593.
What Our Customers Say
"Solar panel on our remote gate wasn't keeping the battery up through the winter. He repositioned it, replaced the battery, and explained the math on why the old placement was never going to work."
- Jodi Miller"Gate works properly now and the price was fair. The one thing is that it took two visits, because the operator model we have is old and the part had to be ordered. They didn't charge for the second trip."
- Miguel Ramirez"The loop detector under the driveway had failed and residents were stuck holding the button. He traced it, found the break, and had the exit loop reading cars again the same visit."
- Vivian Nguyen